Electronics Forum | Mon Feb 01 19:21:43 EST 2021 | petter
DEK248 squeegee speed can't be controlled. It always moves with max speeed or something close to that, regardless of the current settings. Does anyone knows how to fix this?
Electronics Forum | Wed Nov 02 01:14:45 EDT 2022 | angela t
Really? Could you tell me about it? Thank you in advance
Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
Electronics Forum | Tue Feb 12 01:14:46 EST 2019 | sabeti
Hello Everybody, I have a problem with a DEK 265Lt, during downloading the vision, I get this error message: Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE I have found that this might be due to a broke
Electronics Forum | Mon Mar 01 09:20:02 EST 2004 | chrissieneale
We had this problem not long ago and changed to the remountable foils. They are as good as the orignals but they cost less and are practical to store. All our stencils come from DEK and they have a nice little (overpriced) cupboard, if you're working
Electronics Forum | Thu Feb 22 22:01:18 EST 2007 | dekhead
Software version running? Is this on one product or all products? Left to right feed? If yes, is board at left sensor being keyed? Right to left feed? what is setting for "right feed delay", increase it?
Electronics Forum | Fri Feb 19 11:01:50 EST 2016 | ttheis
Yeah, I figured it wouldn't do much but I have a PC on my 249 for my home-made vision system and I have the cable for the serial port so I figured why not try it. It may not even run on Win7. Thanks.
Electronics Forum | Wed Feb 01 11:37:14 EST 2017 | tlake1974
From the main screen maint(F8)Diagost(F6)Machine Setup(F1). Ther is a password required for the Machine Setup menu. It has been awhile since I have needed to know it and can't remember it.
Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu
Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.
Electronics Forum | Wed May 16 01:26:20 EDT 2018 | godless
I was instaling advantech 02.05(typhoon), Software Version 07 SP10 B06. Software reinstall was used because camera stopped working.
